Configurando VLANS com varias FastEthernet em switch cisco.

SW1>enable
Password:
SW1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
SW1(config)#vlan 10
SW1(config-vlan)#name vendas
SW1(config-vlan)#exit
SW1(config)#interface range FastEthernet 0/1 - 10
SW1(config-if-range)#switchport mode access
SW1(config-if-range)#switchport access vlan 10
SW1(config-if-range)#exit
SW1(config)#exit
SW1#